10ton universal tensile testing machine with high low temperature

Application:

This series of testing machines is mainly suitable for stretching, compression, bending, peeling and tearing of materials such as rubber, plastic profiles, plastic pipes, plates, sheets, films, wires and cables, waterproof rolls, and wires in high-temperature or low-temperature environments, shearing and other mechanical properties of the test; it is very convenient for users to carry out research and development and quality control work, and is an ideal testing instrument for industrial and mining enterprises, commodity inspection and arbitration, scientific research units, colleges and universities, and engineering quality departments.
Standards:
1. Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.
2. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.
3. Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-73/23/EEC, EN 61010-1
4. Metal: ASTM E8, ISO 6892, BS EN 10002-1, ASTM E21, IS0 783, EN ISO 7438, ISO 14589, ASTM F606
5. Plastics/ Composites: ASTM D638, EN ISO 6259, EN ISO 527-1, ISO 604, ASTM D695, ASTM D3846, EN ISO 844, EN ISO 13968, EN ISO 9969, etc.
6. Geo-textiles: ASTM D3950, ASTM D 6775-02, BS EN ISO 10319, JBT 8521(EN 1492-2).Rubber: ISO 37, ASTM D41

Specifications:

Model	ETM104C	ETM204C	ETM304C	ETM504C
Load Capacity (kN)	10	20	30	50
Load accuracy	Class 0.5
Testing Load Accuracy	±0.5%
Testing Load Range(FS)	0.2%-100%
Load Resolution	1/500,000FS
Deformation accuracy	≤±0.5% of 0.4%~100% of rated capacity
Position resolution	0.025μm(mm)
Position accuracy	±0.02mm or 0.5% of displacement (whichever is greater)
Crosshead speed range	0.001-1000 (mm/min)
Crosshead speed accuracy	±0.5% of set speed (zero or constant load)
Crosshead Travel(mm)	1100
Room temperature Tensile Space(mm)	770
Room temperature Compression Space(mm)	1000
Room temperature Test width (mm)	450
Load cell	High-precision USA load cell
Position limit switch	Upper and lower lights
Power Supply	AC220V±10%, 50Hz/60Hz
Overall Dimensions (L*W*H: mm)	According to the size of High and Low temperature test chamber
Weight(kG)	According to the size of High and Low temperature test chamber
High temperature environmental test chamber Specifications
Operating temperature range	Room temperature -200℃( according to customer's order)
Cooling system	compressor
Temperature uniformity	< 200 ≤±2°C , ≥ 200 ≤±3,5°C
Temperature Fluctuation	≤±1°C
Heating rate	2-3℃/min
Power	220V
Material of inner box	stainless steel
Outer box material	stainless steel
Heating system	Nickel-chromium alloy heating wire heater
Insulation Materials	Ultra-fine glass wool or rigid foam
Air supply circulation system	a: motor b: lengthened shaft c: centrifugal fan
Chamber Door	Monolithic door
Controller	Temperature Controller
Control panel	Rotary switch
Inside dimensions(mm)	300*300*1000